215-230-8900 Contact

Ionized Air Rinser/Container Cleaner

CHTbottlecleaner

The Ionized Air Rinser is designed to integrate into packaging lines for glass, plastic, metal or fiber containers. The System utilizes the BMH Invertor/Revertor System to rotate containers over an Ionized Air/Vacuum Assembly. By supplying clean dry shop air to the ionized air nozzles it produces a turbulent airflow that pulls the debris towards the vacuum and ionizing nozzles. Removing the filter bag and replacing it with a new bag will eliminate debris that may collect in the filter. Some of the key components include Stainless Steel tubular frame construction with locating pins for quick and easy changeover of the BMH Invertor/Revertor Assemblies. AC Sew Eurodrive motors that can be matched for specific applications are utilized. The electrical box is NEMA 4 rated for our standard, but other NEMA ratings can be used according to specifications. The Ionized Air Rinser can be wired to 230 or 460 VAC or whatever voltage is necessary.The control wiring is simply 110 VAC.

Bottle Cleaner PE 2016

The BMH Invertor/Revertor Assembly gently and rapidly inverts or rotationally positions many varieties of containers. It is constructed of non-contaminating material such as ultra-high molecular weight polyethylene. The BMH Invertor/Revertor can accommodate a large number of operating speeds, and it features a smooth and shock-free operation.

The helical cavity is designed to handle the container on optimum surfaces, which simply means that the container will follow that cavity with minimal backpressure. Because of its design for a specific container it is virtually maintenance free.

The changeover for the BMH Invertor/Revertor Assembly is very easy. It can be performed with two people in a matter of minutes. The large hand wheel on the belt drive allows you to move the belts away from the container so you can remove the BMH Invertor/Revertor Assembly. Handles on the BMH Invertor/Revertor Assembly allow the two people to pick the assembly off the frame. The locating pins allow the new assembly to be placed on the frame and all that is needed is to readjust the belts to accommodate the new container size.

 

The Ionized Air Rinser used for cleaning of a various number of different containers. It allows the product to be cleaned inline while taking up a relatively small area. The Unit is protected from debris with the use of Stainless Steel side panels. The length of the unit measures just over 6 feet while the width is about 28 1/2 inches at the belt drive and 15 inches at the rest of the frame.

 

A pair of pressure belts feed the Invertor/Revertor Assemblies to achieve the desired container per minute and to assist the containers through to assembly. The hand wheel can adjust the drive belts so the different sizes of containers can be used. The belts can handle many different sizes of containers.

 

The rinsing and vacuum areas are one in the same. Three ionized nozzles distribute a positive charge inside and outside of the container, detaching the debris from the container. The vacuum collects debris into the filter canister for manual filter bag disposal at the end of the day, week or month depending on usage and accumulation of debris. Your choice of air (non-ionized), water, or product (distilled) is available upon request. Speak to our technical staff for applications not shown.